Hydrogen, Fuel Catalyst and Alternative Fuel Forum
January 18, 2018, 12:43:23 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: ..... If you find the information in this Forum useful, please consider giving a small donation to help us keep this site going .....
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Send this topic  |  Print  
Author Topic: How to set up computer system for Hydrogen Units  (Read 6144 times)
Offline Offline

Posts: 2

« on: July 24, 2014, 08:26:21 PM »

 I have been looking into putting a hydrogen unit on my 2004 Buick  with a 3800 V6.
 Don't have a clue where to start on tricking the fuel system to work with the hydrogen unit.
 Any advice would be appreciated.

                                    Thanks, Watchmaker
                                     Bellevue MI.   
Jr. Member
Offline Offline

Posts: 20

« Reply #1 on: July 26, 2014, 02:22:28 PM »

Greetings from Oz
I too had the problem as my utility was brand new and i didn't want to go cutting into the wiring harness.
SO after some research I found the Volo site  and they make a hydrogen chip for my model ute.
I ordered one and it was here in 3 days.
The service from the company has been great and so far the chip is working and doing its job.
check them out as it might work for you too?
regards Tubby


Offline Offline

Posts: 2

« Reply #2 on: July 29, 2014, 05:56:43 PM »

What kind of Hydrogen unit are you using ?   Store bought or something you built yourself ?
And thank you for the info.
Please consider Donating a small amount through the links at the top and bottom of each page. This helps to pay for the Web Hosting so as to offer you the information in this Forum. RYFB was set up as a Community Worldwide Service to help reduce our dependency on Damaging Fossil Fuels and we receive NO funding from any other source other than the occasional Donation.
Pages: [1]   Go Up
  Send this topic  |  Print  
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.03 seconds with 20 queries.